Dati Tecnici:

ACTOR is the new advanced series of dimmers produced by ELECTRON. ACTOR dimmers are of compact and robust construction using DMX-512  and analogue 0/+10V control technology. They combine high quality and reliability. On the front panel of  each ACTOR there are six channel sliders (three sliders for ACTOR 325) and a Master control. The units are designed for 19´´rack mounting 3U high (4U for Actor 625) in fixed installations or  touring racks. The DMX address can be selected through the 4 push buttons mounted on the front panel. There is a display indicating the correct or incorrect condition of the digital serial input, one monitor LED per output status and three LEDs for the power supply.

• Soft start adjustable per channel.
• Preheat level adjustable per channel.
• 3 Selectable Laws (curves) per channel: Linear, Incandescent, Switch.
• 12 Pre-programmed chases with capability of adjusting the speed and the intensity.
• Programmable behaviour on DMX signal interruption (blackout or hold of last DMX address).
• Soft power up for inrush current limiting when the power is switched on.
• Suitable for controlling resistive or inductive loads, incandescent lamps and iron-core transformers to supply low voltage lamps.
• ACTOR series is normally supplied with XLR 5-pin DMX IN/OUT, alternatively XLR 3-pin DMX IN/OUT can be supplied at no additional cost.